Root and Custom Recovery in XT1033
How to Root Moto G
There are are 3 simple steps :1. UNLOCK BOOTLOADER
2. FLASH CUSTOM RECOVERY [I USED CWM]
3. FLASH SUPERSU
DONE
Yeah ...you don't need to downgrade your bootloader which is very risky
Procedure :
1. UNLOCKING BOOTLOADER :- i thinks its already explained well at different sites and motorola's site also [ i used this guide Moto-g-unlock-bootloader-and-root only for unlocking]
2. FLASHING RECOVERY-
You need 3 things
(a) motorola usb drivers [download from here ]
(b) adb drivers (download from here ]
(c) Custom recovery (download from here ] i used cwm without touch OR USE PHILZ RECOVERY (4.4.4) CLICK HERE TO DOWNLOAD
The procedures are :-
1. install motorola usb drivers
2. extract adb drivers anywhere in your computer
3. copy recovery.img [i renamed it to only recovery] into adb tools folder
4. boot your phone into fastboot mode by pressing volume down key and pressing power key simultaneously , and then releasing power key .
5. connect your moto g to your computer through data cable
6. go into adb tools folder => while pressing shift key => right click => and click open cmd here !
7. type [fastboot flash recovery recovery.img] and press enter { IGNORE Mismatched partition size' AFTER FLASHING RECOVERY }
DONE just press volume down and then volume up to boot into cwm
3. FLASHING SUPER SU
1. DOWNLOAD THIS FILE FROM HERE
2. PUT IT IN INTERNAL MEMORY
PROCEDURE => IN CWM =>INSTALL FROM SD CARD => CHOOSE SUPER SU => RESTART
It will ask 'root is broken' WHEN REBOOTING FROM CWM.
CHOOSE YES
DONE !
I AM NOT RESPONSIBLE FOR ANYTHING !
Reference : http://forum.xda-developers.com/showthread.php?t=2684234
No comments for "Root and Custom Recovery in XT1033"
Post a Comment